easy to use air pressure pump bar from wholesale for pressurization

Air booster pump with max 40 bar pressure

Suncenter DGMA02 series Pneumatic Air booster pump with single air control non-equilibrium air distributing valve to realize the reciprocating motion of the pump, are made of aluminum alloy and stainless steel manufacturing, all the seals are imported high quality products and equipment for the pneumatic drive are 10bar, in order to ensure the pump's life, it is recommended driving pressure is less than or equal to 8 bar. This series pump's drive piston diameter of 100mm, as a single action pump, all single acting pump head with exhaust cooling.

Air booster pump with max 40 bar pressure

easy to use air pressure pump bar from wholesale for pressurization-1

◪ technical parameters
◪ Driven source: clean compressed air
◪ Air pressure control system
◪ Drive compressed air pressure: 1-8bar (recommended drive pressure<8bar)
◪ Boost Ratio:2:1
◪ Maximum flow rate : 580L/min
◪ Maximum air output pressure: 16bar.
◪ Applicable medium: clean air
◪ Air inlet minimum pressure: 1bar

Model	Pressure boost ratio	Max. air outlet pressure	Formula to calculate air outlet pressure PB	Connection: (NPT thread)	Max. flow rate (L/min)
DGMA02	2：1	16 bar	2XPL	3/8 / 3/8	580
DGVA02	2：1	16 bar	2XPL	3/8 / 3/8	1600
DGMA03	3：1	24 bar	3XPL	1/2 / 1/2	420
DGVA05	5：1	40 bar	5XPL	1/2 / 1/2	820

Suncenter DGVA02 Pneumatic Air booster pump with single air control non-equilibrium air distributing valve to realize the reciprocating motion of the pump, are made of aluminum alloy and stainless steel manufacturing, all the seals are imported high quality products and equipment for the pneumatic drive are 10bar, in order to ensure the pump's life, it is recommended driving pressure is less than or equal to 8 bar. This series pump's drive piston diameter of 160mm, as a single action pump, all single acting pump head with exhaust cooling.

easy to use air pressure pump bar from wholesale for pressurization-2

◪ Technical parameters
◪ Driven source: clean compressed air
◪ Drive compressed air pressure: 1-8bar (recommended drive pressure<8bar)
◪ Boost Ratio:2:1
◪ Maximum flow rate : 1600L/min
◪ Maximum air output pressure: 16bar.
◪ Applicable medium: clean air
◪ Air inlet minimum pressure: 1bar

Suncenter DGMA03 series Pneumatic Air booster pump with single air control non-equilibrium air distributing valve to realize the reciprocating motion of the pump, are made of aluminum alloy and stainless steel manufacturing, all the seals are imported high quality products and equipment for the pneumatic drive are 10bar, in order to ensure the pump's life, it is recommended driving pressure is less than or equal to 8 bar.

easy to use air pressure pump bar from wholesale for pressurization-3

◪ Technical parameters
◪ Driven source: clean compressed air
◪ Air pressure control system
◪ Drive compressed air pressure: 1-8bar (recommended drive pressure<8bar)
◪ Boost Ratio:3:1
◪ Maximum flow rate : 420L/min
◪ Maximum air output pressure: 24bar.
◪ Applicable medium: clean air
◪ Air inlet minimum pressure: 1bar

Suncenter DGVA05 series Pneumatic Air booster pump with single air control non-equilibrium air distributing valve to realize the reciprocating motion of the pump, are made of aluminum alloy and stainless steel manufacturing, all the seals are imported high quality products and equipment for the pneumatic drive are 10bar, in order to ensure the pump's life, it is recommended driving pressure is less than or equal to 8 bar. This series pump's drive piston diameter of 160mm, as a single action pump, all single acting pump head with exhaust cooling.

easy to use air pressure pump bar from wholesale for pressurization-4

◪ Technical parameters
◪ Driven source: clean compressed air
◪ Air pressure control system
◪ Drive compressed air pressure: 2-8bar (recommended drive pressure<8bar)
◪ Boost Ratio:5:1
◪ Maximum flow rate : 820L/min
◪ Maximum air output pressure: 40bar.
◪ Applicable medium: clean air
◪ Air inlet minimum pressure: 2bar

Characteristics :

It is using pure compressed air as the driving source, pneumatic booster pump for the pressure source, the use of pure air as the pressurized medium, the output air pressure and the pressure of the driving air source pressure. By adjusting the pressure of the driven air source, the corresponding pressure of the air pressure can be obtained. When the air pressure of the air pressure and the pressure of the booster is balanced, the pneumatic booster pump stops the pressurization, and the output air pressure is stable. Therefore it has the characteristics of explosion proof, energy saving, environmental protection, adjustable output pressure, small volume, light weight, simple operation, reliable performance and wide application range.

DGS-DGMA02 air pressure booster system

easy to use air pressure pump bar from wholesale for pressurization-5

◪ The system including: DGMA02 air booster pump,
◪ F.R.L combination (adjust driven air pressure+ filter+ lubricant)
◪ Air tank (20L/40L),Driven air switch, high pressure needle valve, high pressure gauge, reducing valve

DGS-DGVA02 air pressure booster system

easy to use air pressure pump bar from wholesale for pressurization-6

◪ The system including: DGVA02 air booster pump
◪ F.R.L combination (adjust driven air pressure+ filter+ lubricant)
◪ Air tank (20L/40L),Driven air switch, high pressure needle valve, high pressure gauge, reducing valve

Model	Pressure boost ratio	Max. air outlet pressure	Formula to calculate air outlet pressure PB	Connection: (NPT thread)	Max. flow rate (L/min)
DGS-DGMA02	2：1	16 bar	2XPL	3/8 / 3/8	580
DGS-DGVA02	2：1	16 bar	2XPL	3/8 / 3/8	1600
DGS-DGMA03	3：1	24 bar	3XPL	1/2 / 1/2	420
DGS-DGVA05	5：1	40 bar	5XPL	1/2 / 1/2	820

DGS-DGVA05 air pressure booster system

easy to use air pressure pump bar from wholesale for pressurization-7

◪ The system including: DGVA05 air booster pump
◪ F.R.L combination (adjust driven air pressure+ filter+ lubricant)
◪ Air tank (20L/40L),Driven air switch, high pressure needle valve, high pressure gauge, reducing valve

video

o******h

The design of Suncenter air pressure pump is very practical. It is carefully designed according to the size, weight, and characteristics of the product to be packaged. Its solderable surface is protected from the oxidation

n******z

Suncenter air pressure booster presents a perfect marketing effect with its attractive design style. Its design is inspired by our designers who have been working on design innovation and day and night. It is lead-free and environmental-friendly and has passed SGS test

m******b

The production of Suncenter air pressure booster uses high technology. And the technology we used is constantly updated, the packaging capacity is always guaranteed. It is lead-free and environmental-friendly and has passed SGS test

j******m

In terms of materials, Suncenter air pressure pump offers a variety of possible options. These high-quality materials are purchased from local reliable suppliers. The product can be resistant to corrosion

w******x

The model of Suncenter air pressure booster is designed using computer aided software such as CAD. This design approach allows our production team to complete the model in a few hours. The product is certified under UL(E357001) and RoHS

x******d

established a complete cost management system, strictly controlled the cost of each production link of the product, and strived to increase the utilization rate of raw materials, reduce production waste, and reduce logistics costs, so that the produced air pressure booster Other similar products have more advantages in quality and price.

Mensaje del producto

*Nombre

Teléfono

*Correo electrónico

*Contenido