hydrostatic pressure test | Safety valve test bench

latest_products

Instrucciones de la bomba de prueba de presión manual

Bomba de prueba de presión hidráulica / hidráulica / hidrostática

Máquina de prueba de medición externa del cilindro de gas con chaquetas de agua

Bomba de inyección de reactivo químico neumático

Información de producto
realimentación

Application Scope

The booster pumps produced by Suncenter Fluid Control Equipment is of high quality and is widely used in the industry.Suncenter Fluid Control Equipment insists on providing customers with reasonable solutions according to their actual needs.

Company Advantages
1. Suncenter hydro pressure test pump is made of quality-approved raw materials.
2. The product has high reliability, good performance and low cost.
3. The outstanding feature of this product lies in its high performance. The performance of the product is based on the needs of the customers in the industry.
4. Maintaining this product is an easy and time-saving job for people. They just need to regularly wipe the dust and check whether the electric cords are in good condition or not.

Introduction

Safety valve test bench SVT40-DN400-CC computer control model-1

◪ The safety valve test bench is a new type of pressure test device developed by our company for reference to GB/T 12242-2005 (pressure release device and performance test specification), which is used to adjust and test the setting pressure of the safety valve.

Function and features

Safety valve test bench is used for various safety valve setting pressure adjustment, the whole set pressure detection, discharge pressure detection, back seat pressure testing, assessment of its pressure safety performance etc.. ,

◪ A. pressure range: 0-480 bar for option(gas pressure and water pressure)
◪ B. test medium: air, nitrogen, water;
◪ C. test valve diameter: DN15-DN400 for option
◪ D. pressure control accuracy: less than 1%F.S;
◪ E. pressure measurement accuracy: 0.4 pressure gauge (optional higher pressure level);

◪ F. Clamping way: hydraulic cylinder clamping;
◪ G. station interface type: screw and flange type
◪ H. clamping force output range: 0-50 tons;
◪ I. supply voltage: 50Hz -60Hz ,220V/380V for option
◪ J.Size：1500×1200×900mm(machine) +1500×800×800mm(clamping device)

Control panel

Safety valve test bench SVT40-DN400-CC computer control model-2

Clamping seat

Safety valve test bench SVT40-DN400-CC computer control model-3

Schematic diagram

Safety valve test bench SVT40-DN400-CC computer control model-4

Instruction for software control part

Safety valve test bench SVT40-DN400-CC computer control model-5

◪ Figure 1
◪ The first step: start the computer and double click the boot program, as shown in Figure 1.
◪ The second step: after the program, enter the main interface of the program.

Safety valve test bench SVT40-DN400-CC computer control model-6

◪ In the main interface, select the appropriate sensor, and pay attention to the selection of the sensor not to exceed the 2/3. of the measuring process ,as shown in Figure3

Safety valve test bench SVT40-DN400-CC computer control model-7

◪ In the main interface, choose water pressure test or air pressure test. As shown in Figure 4.

Safety valve test bench SVT40-DN400-CC computer control model-8

◪ After selecting the pressure or water pressure test, click the menu bar test information to set the options. As shown in Figure 5.

Safety valve test bench SVT40-DN400-CC computer control model-9

◪ Display the dialog box for the test information, as shown in Figure6

With printer,could print the testing report directly.

Safety valve test bench SVT40-DN400-CC computer control model-10

Safety valve test bench SVT40-DN400-CC computer control model-11

Safety valve test bench SVT40-DN400-CC computer control model-12

◪ Safety valve test bench SVT40-DN400-CC computer control model

video

Company Features
1. After years of evolvement, Dongguan Suncenter Fluid Control Equipment Co., Ltd has finally defeated many other competitors and stood out in the markets relying on the ability in manufacturing hydro pressure test pump .
2. The complete modern management system is available in Dongguan Suncenter Fluid Control Equipment Co., Ltd's manufacturing plant.
3. We continuously enhance our practices in sustainability. We reduce CO2 emissions and the use of natural resources as well as improve energy and water efficiency. Our goal is to help customers get the perfect product in the most cost effective way. This means helping them choose the right material, the right design and the right machine for their specific application. Inquire online!

y******s

For its material, we used hydro pressure test pump that was typical for hydro pressure test pump.

r******t

hydro pressure test pump is made of high quality hydrostatic pressure test with perfect performance such as hydrostatic pressure test.

c******u

hydro pressure test pump is made of hydrostatic pressure test and has the advantages of hydrostatic pressure test.

e******p

The series of hydro pressure test pump are hydro pressure test pump, will bring the best result of [拓展关键词特点] for you.

y******t

hydro pressure test pump make hydrostatic pressure test practically and easy to operate.

f******x

Excellent leakproofness is one of its biggest selling points. Some small power components have been added to the passage to pose pressure on the leakage objects to balance or offset the differential pressure.

Mensaje del producto

*Nombre

Teléfono

*Correo electrónico

*Contenido