safe hydrostatic pressure test booster marketing for natural gas boosts pressure

latest_products

Instrucciones de la bomba de prueba de presión manual

Bomba de prueba de presión hidráulica / hidráulica / hidrostática

Máquina de prueba de medición externa del cilindro de gas con chaquetas de agua

Bomba de inyección de reactivo químico neumático

Información de producto
realimentación

Gas booster pressure test bench

Suncenter - Air/Gas pressure test bench are compact and delicacy solution tailored to customer specific requirements with gas(air) boosters as well as all accessories to be fitted and installed in the frame or a closed cabinet.

To operate this system, the pressure gauges, valves and pressure regulators have to be fitted on panels. The outlet pressure is easily to be set through a simple air regulator.

The pump stops automatically when this end pressure is reached and restarts with a slight drop in the outlet pressure or an increase in the air drive pressure.

Operating pressure up to 80 MPa, for higher pressure, pump with double driven heads is an ideal option.

Suncenter booster hydrostatic pressure test marketing for natural gas boosts pressure-1

The hottest selling- Model C frame type cabinet picture

Suncenter booster hydrostatic pressure test marketing for natural gas boosts pressure-2

◪ The standard gas booster pumps system including following parts:
◪ Air –driven gas booster pump (DGA/DGD/DGT three series for choosing)
◪ Stainless steel (carbon steel) material cabinet (Three models for choosing)
◪ F.R.L combination for driven air (adjusts air pressure, add lubricating oil and water filter)
◪ Driven air switch (Pump starting switch), driven air pressure gauge
◪ Gas inlet switch, Gas inlet pressure gauge
◪ Gas outlet switch, Gas outlet pressure gauge, unloading valve, interconnecting pipes etc.
◪ And we could also customize it according to clients’ special requirement.

Suncenter booster hydrostatic pressure test marketing for natural gas boosts pressure-3

◪ DGS series air/gas pressure test bench with round chart recorder

Model	Pressure boost ratio	Min. gas Inlet pressure PA (bar)	Max.gas Inlet pressure PA (bar)	Max. gas outlet pressure PB (bar)	Driven air pressure PL	Formula to calculate gas outlet pressure PB	Connection: Gas Inlet / Gas outlet (ZG thread)	Max. flow at driven air pressure of 6bar (L/min)
DGS-DGA02	2：1	1.0	16	16	2-8 bar	2X PL	1/2 / 1/2	960 (at PA of 6 bar )
DGS-DGA05	5：1	0	40	40	2-8 bar	5XPL	1/2 / 1/2	680(at PA of 6 bar )
DGS-DGA10	10：1	3.5	80	80	2-8 bar	10XPL	3/8/ 3/8	210(at PA of 10 bar )
DGS-DGA25	25：1	7.0	200	200	2-8 bar	25XPL	1/4/ 1/4	120(at PA of 20 bar )
DGS-DGA40	40：1	10	320	320	2-8 bar	40XPL	1/4/ 1/4	200(at PA of 40 bar )
DGS-DGA60	60：1	20	480	480	2-8 bar	60XPL	1/4/ 1/4	180(at PA of 40 bar )
DGS-DGA100	100：1	25	800	800	2-8 bar	100XPL	1/4/ M14X1.5	136(at PA of 40 bar )
DGS-DGA130	130：1	35	800	1040	2-8 bar	130XPL	1/4/ M14X1.5	120(at PA of 40 bar )

Technical specification for DGS-DGD series

Model	Pressure boost ratio	Min. gas Inlet pressure PA (bar)	Max.gas Inlet pressure PA (bar)	Max. gas outlet pressure PB (bar)	Driven air pressure PL	Formula to calculate gas outlet pressure PB	Connection: Gas Inlet / Gas outlet (ZG thread)	Max. flow at driven air pressure of 6bar (L/min)
DGS-DGD10	10:1	3.5	80	80	2-8 bar	10XPL+ PA	3/8/3/8	410(at PA of 6 bar )
DGS-DGD25	25:1	10	200	200	2-8 bar	25XPL+ PA	1/4/1/4	396(at PA of 20 bar )
DGS-DGD40	40:1	15	320	320	2-8 bar	40XPL+ PA	1/4/1/4	320(at PA of 40 bar )
DGS-DGD60	60:1	25	480	480	2-8 bar	60XPL+ PA	1/4/1/4	215(at PA of 40 bar )
DGS-DGD100	100:1	35	800	800	2-8 bar	100XPL+ PA	1/4/M14*1.5	300(at PA of 60 bar )

Technical specification for DGS-DGT series

Model	Pressure boost ratio	Min. gas Inlet pressure PA (bar)	Max.gas Inlet pressure PA (bar)	Max. gas outlet pressure PB (bar)	Driven air pressure PL	Formula to calculate gas outlet pressure PB	Connection: Gas Inlet / Gas outlet (ZG thread)	Max. flow at driven air pressure of 6bar (L/min)
DGS-DGT25	25:1	0.1	10	200	2-8 bar	25XPL+3.5XPA	1/4/ 1/4	136(at PA of 8 bar )
DGS-DGT40	40:1	0.1	10	320	2-8 bar	40XPL+ 6XPA	1/4/1/4	124(at PA of 8 bar )
DGS-DGT10/60	10:1/60:1	0.1	10	480	2-8 bar	60XPL+6X PA	1/4/1/4	84(at PA of 8 bar )
DGS-DGT25/60	25:1/60:1	10	25	480	2-8 bar	60XPL+2.5XPA	1/4/1/4	80(at PA of 15 bar )
DGS-DGT100	100:1	0.1	10	800	2-8 bar	100XPL+10XPA	1/4/ M14*1.5	63(at PA of 8 bar )

video

u******e

gas booster system It is made of high-strength materials and precision parts, using first-class manufacturing technology and exquisite processing technology. It has the characteristics of small size, light weight, simple use, and durability.

p******a

hydrostatic pressure test The bottom is designed with a non-slip mat, which is more stable and wear-resistant, and it is not easy to wear and tear the furniture, showing excellent quality in the details.

u******j

hydrostatic pressure test Selected high-quality plastic raw materials, processed by co-extrusion blow molding process, light and transparent texture, easy to use, reliable quality, good packaging effect, enjoys a good reputation in the market.

i******b

gas booster system The design is simple, the shape is beautiful, the workmanship is fine, the quality is high, the bottle body is thick and strong, the quality is high, and it is durable.

z******q

gas booster system It adopts a thickened packaging design, which has good airtightness, strong water retention, can reduce water evaporation, and will not dry for a long time.

d******b

Reliable quality and durability are our competitive advantages. It has increased power densities which guarantee its long service life

Mensaje del producto

*Nombre

Teléfono

*Correo electrónico

*Contenido