high quality co2 pump booster temperature for natural gas boosts pressure

latest_products

Instrucciones de la bomba de prueba de presión manual

Bomba de prueba de presión hidráulica / hidráulica / hidrostática

Máquina de prueba de medición externa del cilindro de gas con chaquetas de agua

Bomba de inyección de reactivo químico neumático

Información de producto
realimentación

Enterprise Strength

Suncenter Fluid Control Equipment runs the business in good faith and builds a unique service model to provide quality services for customers.

Product Comparison

Suncenter Fluid Control Equipment's hydro test pump is produced in strict accordance with standards. We make ensure that the products have more advantages over similar products in the following aspects.

Company Advantages
1. Suncenter co2 pump is manufactured according to the regulations for electric appliances. Its Electro Magnetic Compatibility (EMC), ability to resist electric arc, overload protection, and heat dissipation capability have been assessed to at a qualified level.
2. The product is able to provide protection for the stuff. It is made from lightweight, impact-resistant materials and its sturdy frame provide extra excellent protection.
3. Dongguan Suncenter Fluid Control Equipment Co., Ltd has become more prominent and has gradually gained more market share in co2 pump field.

Air Driven Liquid CO2 Booster Pump-DGG/DGGD Series.

SUNCENTER pumps are air driven at a drive air pressure of 2bar to 8bar by the normal air compressor. Basically the principle of operation is similar to a reciprocating amplifier where control of the piston at the end position is regulated by a pilot operated 4/2 way valve.

Suncenter pumps feature a large air piston joint to a smaller diameter plunger. The pressure ratio is the difference of these two areas and is the method of determining maximum outlet pressure. Higher pressures obtained by using higher pressure ratios.Suncenter model numbers reflect the pumps nominal pressure ratios， while the technical data indicates exact ratios. The outlet pressure is easily to set through a simple air regulator. By multiplying the pressure ratio by the available shop air pressure, the nominal outlet pressure can be calculated.

Suncenter high quality co2 pump temperature for natural gas boosts pressure-1

DGG Series Liquid CO2 Booster Pumps(Single acting)

Suncenter high quality co2 pump temperature for natural gas boosts pressure-2

◪ DGG Series Liquid CO2 Booster Pumps(Single acting)  

Model	Pressure Boost Ratio	Driven air pressure PL	Formula to calculate outlet pressure	MAX Outlet Pressure(bar)*	Liquid inlet Connection	Liquid outlet Connection	MAX Flow (L/min)
DGG6	6:1	2-8 bar	6XPL	48	NPT1/2	NPT1/2	29.91
DGG10	10:1	2-8 bar	10XPL	80	NPT1/2	NPT1/2	18.84
DGG16	16:1	2-8 bar	16XPL	128	NPT1/2	NPT1/2	12.42
DGG28	28:1	2-8 bar	28XPL	224	NPT1/2	NPT1/2	7.11
DGG40	40:1	2-8 bar	40XPL	320	NPT1/2	NPT1/2	4.89
DGG64	64:1	2-8 bar	64XPL	512	NPT1/2	NPT3/8	3.08
DGG80	80:1	2-8 bar	80XPL	640	NPT1/2	NPT3/8	2.44
DGG100	100:1	2-8 bar	100XPL	800	NPT1/2	NPT3/8	1.92
DGG130	130:1	2-8 bar	130XPL	1040	NPT1/2	M14X1.5	1.47
DGG175	175:1	2-8 bar	175XPL	1400	NPT3/8	M14X1.5	1.14

DGGD Series Liquid CO2 Pumps(Double acting)

Suncenter high quality co2 pump temperature for natural gas boosts pressure-3

◪ DGGD Series Liquid CO2 Pumps(Double acting) 

Model	Pressure Boost Ratio	Driven air pressure PL	Formula to calculate outlet pressure	MAX Outlet Pressure(bar)*	Liquid inlet Connection	Liquid outlet Connection	MAX Flow (L/min)**
DGGD4	4:1	2-8 bar	4XPL	32	NPT1/2	NPT1/2	70.00
DGGD6	6:1	2-8 bar	6XPL	48	NPT1/2	NPT1/2	48.60
DGGD10	10:1	2-8 bar	10XPL	80	NPT1/2	NPT1/2	30.61
DGGD16	16:1	2-8 bar	16XPL	128	NPT1/2	NPT1/2	19.73
DGGD28	28:1	2-8 bar	28XPL	224	NPT1/2	NPT1/2	11.30
DGGD40	40:1	2-8 bar	40XPL	320	NPT1/2	NPT3/8	7.69
DGGD64	64:1	2-8 bar	64XPL	512	NPT1/2	NPT3/8	4.94
DGGD80	80:1	2-8 bar	80XPL	640	NPT1/2	NPT3/8	3.96
DGGD100	100:1	2-8 bar	100XPL	800	NPT1/2	NPT3/8	3.13
DGGD130	130:1	2-8 bar	130XPL	1040	NPT1/2	M14*1.5	2.40
DGGD175	175:1	2-8 bar	175XPL	1400	NPT3/8	M14*1.5	1.81

Suncenter high quality co2 pump temperature for natural gas boosts pressure-4

◪ Liquid carbon dioxide booster pump and pressurization equipment, commonly used in carbon dioxide supercritical extraction of various plant extracts, material foaming, and carbon dioxide fire extinguisher filling. Among them, carbon dioxide extraction is often used in biopharmaceuticals. Experimental research works by using a special pump for liquid carbon dioxide to pressurize carbon dioxide to a supercritical state, which is used to decompose various elements in plants for easy extraction.

DGGD series liquid CO2 pump working picture

Suncenter high quality co2 pump temperature for natural gas boosts pressure-5

◪ DGGD series liquid CO2 pump working picture

features

※ Compressed Air driven - no electricity required (connect to normal air compressor)
※ In order to extend the lifetime of the pump, the driving air pressure should not be higher than 8 bar
※ No airline lubricator required
※ Wide range of models with different ratios
※ Built-in-cooling on most models
※ Easy to install, operate and maintain
※ Best price / performance ratio
※ No heat, flame or spark risk and explosion proof 
※ Automatic pressure holding, whatever the cause of the pressure drop, the Suncenter pump will automatically start, keep the loop pressure constant 
※ Applicable for liquid CO2/liquid+gas mixed CO2/Supercritical CO2
※ For liquid CO2 cylinder transfer/filling
※ For CO2 Fire Extinguisher filling 
※ For Supercritical CO2 extraction

video

Company Features
1. Dongguan Suncenter Fluid Control Equipment Co., Ltd wins big trust from customers for manufacturing co2 pump with reliable quality.
2. Dongguan Suncenter Fluid Control Equipment Co., Ltd has outstanding high-quality scientific R&D team and market management personnel.
3. We perform social responsibility in our business operation. One of our primary focus is the environment. We take steps to reduce carbon footprints, which is good for both the company and society. We minimize and recycle waste during our operation. We strive to reduce the production waste we send to landfill and have an ultimate goal of zero waste to landfill. We aim to increase the customer satisfaction rate. We always keep an open mind and respond actively to clients' every piece of feedback. We have set our manufacturing sustainability strategy. We are reducing the greenhouse gas emissions, waste and water impacts of our manufacturing operations as our business grows.

j******v

Suncenter co2 pump is processed deeply with professional techniques, including drill hole, stretch bending, milling, welding, fabrication, as well as other chemical processes. The materials of our products include ABS, POM, PC, PA6, PA66, PMMA, aluminum, iron, steel, bake-lite, EVA and etc

w******w

In the designing stage of Suncenter co2 transfer pump, thermodynamics and the law of heat conduction theories are taken into consideration by the designers. Our products are well packaged and protected during transportation

n******g

Suncenter co2 transfer pump has to go through a secondary surface operation process which mainly includes finish plating, anodizing, powder coating, and heat treatment. Prototype is made by CNC Milling,and the involved surface finishing including polishing, painting, the logo sticking

n******k

Suncenter co2 pump is the outcome of thermodynamics knowledge. Its whole body part especially the air circulation parts are made with special materials and circulating layout. Our products are well packaged and protected during transportation

v******l

The quality control of Suncenter co2 transfer pump is conducted rigorously. It is tested in terms of its air circulation, surface treatment, as well as the most important part, thermal dissipation performance. We have professional QC team to strictly control quality of our products

h******i

The product has excellent flexibility and endurance. It is able to repeat the movement for thousands of times without malfunction. Equipped with advanced machines, we can provide customized service for our products

Mensaje del producto

*Nombre

Teléfono

*Correo electrónico

*Contenido