safe co2 pump liquid equipment for pressurization

latest_products

Instrucciones de la bomba de prueba de presión manual

Bomba de prueba de presión hidráulica / hidráulica / hidrostática

Máquina de prueba de medición externa del cilindro de gas con chaquetas de agua

Bomba de inyección de reactivo químico neumático

Información de producto
realimentación

Air Driven Liquid CO2 Booster Pump-DGG/DGGD Series.

SUNCENTER pumps are air driven at a drive air pressure of 2bar to 8bar by the normal air compressor. Basically the principle of operation is similar to a reciprocating amplifier where control of the piston at the end position is regulated by a pilot operated 4/2 way valve.

Suncenter pumps feature a large air piston joint to a smaller diameter plunger. The pressure ratio is the difference of these two areas and is the method of determining maximum outlet pressure. Higher pressures obtained by using higher pressure ratios.Suncenter model numbers reflect the pumps nominal pressure ratios， while the technical data indicates exact ratios. The outlet pressure is easily to set through a simple air regulator. By multiplying the pressure ratio by the available shop air pressure, the nominal outlet pressure can be calculated.

Suncenter liquid co2 pump equipment for pressurization-1

DGG Series Liquid CO2 Booster Pumps(Single acting)

Suncenter liquid co2 pump equipment for pressurization-2

◪ DGG Series Liquid CO2 Booster Pumps(Single acting)  

Model	Pressure Boost Ratio	Driven air pressure PL	Formula to calculate outlet pressure	MAX Outlet Pressure(bar)*	Liquid inlet Connection	Liquid outlet Connection	MAX Flow (L/min)
DGG6	6:1	2-8 bar	6XPL	48	NPT1/2	NPT1/2	29.91
DGG10	10:1	2-8 bar	10XPL	80	NPT1/2	NPT1/2	18.84
DGG16	16:1	2-8 bar	16XPL	128	NPT1/2	NPT1/2	12.42
DGG28	28:1	2-8 bar	28XPL	224	NPT1/2	NPT1/2	7.11
DGG40	40:1	2-8 bar	40XPL	320	NPT1/2	NPT1/2	4.89
DGG64	64:1	2-8 bar	64XPL	512	NPT1/2	NPT3/8	3.08
DGG80	80:1	2-8 bar	80XPL	640	NPT1/2	NPT3/8	2.44
DGG100	100:1	2-8 bar	100XPL	800	NPT1/2	NPT3/8	1.92
DGG130	130:1	2-8 bar	130XPL	1040	NPT1/2	M14X1.5	1.47
DGG175	175:1	2-8 bar	175XPL	1400	NPT3/8	M14X1.5	1.14

DGGD Series Liquid CO2 Pumps(Double acting)

Suncenter liquid co2 pump equipment for pressurization-3

◪ DGGD Series Liquid CO2 Pumps(Double acting) 

Model	Pressure Boost Ratio	Driven air pressure PL	Formula to calculate outlet pressure	MAX Outlet Pressure(bar)*	Liquid inlet Connection	Liquid outlet Connection	MAX Flow (L/min)**
DGGD4	4:1	2-8 bar	4XPL	32	NPT1/2	NPT1/2	70.00
DGGD6	6:1	2-8 bar	6XPL	48	NPT1/2	NPT1/2	48.60
DGGD10	10:1	2-8 bar	10XPL	80	NPT1/2	NPT1/2	30.61
DGGD16	16:1	2-8 bar	16XPL	128	NPT1/2	NPT1/2	19.73
DGGD28	28:1	2-8 bar	28XPL	224	NPT1/2	NPT1/2	11.30
DGGD40	40:1	2-8 bar	40XPL	320	NPT1/2	NPT3/8	7.69
DGGD64	64:1	2-8 bar	64XPL	512	NPT1/2	NPT3/8	4.94
DGGD80	80:1	2-8 bar	80XPL	640	NPT1/2	NPT3/8	3.96
DGGD100	100:1	2-8 bar	100XPL	800	NPT1/2	NPT3/8	3.13
DGGD130	130:1	2-8 bar	130XPL	1040	NPT1/2	M14*1.5	2.40
DGGD175	175:1	2-8 bar	175XPL	1400	NPT3/8	M14*1.5	1.81

Suncenter liquid co2 pump equipment for pressurization-4

◪ Liquid carbon dioxide booster pump and pressurization equipment, commonly used in carbon dioxide supercritical extraction of various plant extracts, material foaming, and carbon dioxide fire extinguisher filling. Among them, carbon dioxide extraction is often used in biopharmaceuticals. Experimental research works by using a special pump for liquid carbon dioxide to pressurize carbon dioxide to a supercritical state, which is used to decompose various elements in plants for easy extraction.

DGGD series liquid CO2 pump working picture

Suncenter liquid co2 pump equipment for pressurization-5

◪ DGGD series liquid CO2 pump working picture

features

※ Compressed Air driven - no electricity required (connect to normal air compressor)
※ In order to extend the lifetime of the pump, the driving air pressure should not be higher than 8 bar
※ No airline lubricator required
※ Wide range of models with different ratios
※ Built-in-cooling on most models
※ Easy to install, operate and maintain
※ Best price / performance ratio
※ No heat, flame or spark risk and explosion proof 
※ Automatic pressure holding, whatever the cause of the pressure drop, the Suncenter pump will automatically start, keep the loop pressure constant 
※ Applicable for liquid CO2/liquid+gas mixed CO2/Supercritical CO2
※ For liquid CO2 cylinder transfer/filling
※ For CO2 Fire Extinguisher filling 
※ For Supercritical CO2 extraction

video

w******q

The design of Suncenter N2O pump is the application of some basic knowledge. They are Mathematics, Engineering Mechanics, Strength of Materials, Finite Element Analysis, etc. It is manufactured to the standards such as EN 60825

m******n

The manufacture of Suncenter N2O pump is professional. A multi-stage production process is employed. It includes design, production, assembly, and testing. Being computer numerical controlled, it is less likely to cause a break of material

i******p

Materials used for Suncenter N2O pump has been tested. The tests include toughness or brittleness testing, hardness testing, tensile testing, etc. Being computer numerical controlled, it requires fewer labor costs

j******w

The design of Suncenter co2 pump shows professionalism. The mechanical properties, including materials hardness, structural toughness, efficiency, fatigue resistance have all optimized. It can be designed to be wireless using wireless technology

g******l

Suncenter co2 pump is manufactured with high-quality materials. The materials have to be tested under professional machines for their mechanical properties, such as hardness, brittleness, tensile strength, and so forth. It supports formats including DXF, DWG, EPS, AI, BMP, JPG, TIF, and GIF

i******i

Suncenter's product is subject to a professional quality inspection team. With a compact design, it has a small footprint

Mensaje del producto

*Nombre

Teléfono

*Correo electrónico

*Contenido