Suncenter max booster air compressor vendor for pressurization

Suncenter  DGMA02 series Pneumatic Air booster pump with single air control non-equilibrium air distributing valve to realize the reciprocating motion of the pump, are made of aluminum alloy and stainless steel manufacturing, all the seals are imported high quality products and equipment for the pneumatic drive are 10bar, in order to ensure the pump's life, it is recommended driving pressure is less than or equal to 8 bar. This series pump's drive piston diameter of 100mm, as a single action pump, all single acting pump head with exhaust cooling.

• ◪ technical parameters

• ◪ Driven source: clean compressed air

• ◪ Air pressure control system

• ◪ Drive compressed air pressure: 1-8bar (recommended drive pressure<8bar)                        

• ◪ Boost Ratio:2:1

• ◪ Maximum flow rate : 580L/min

• ◪ Maximum air output pressure: 16bar.

• ◪ Applicable medium: clean air

• ◪ Air inlet minimum pressure: 1bar

Suncenter  DGVA02 Pneumatic Air booster pump with single air control non-equilibrium air distributing valve to realize the reciprocating motion of the pump, are made of aluminum alloy and stainless steel manufacturing, all the seals are imported high quality products and equipment for the pneumatic drive are 10bar, in order to ensure the pump's life, it is recommended driving pressure is less than or equal to 8 bar. This series pump's drive piston diameter of 160mm, as a single action pump, all single acting pump head with exhaust cooling.

• ◪  Technical parameters

• ◪ Driven source: clean compressed air

• ◪ Drive compressed air pressure: 1-8bar (recommended drive pressure<8bar)                        

• ◪ Boost Ratio:2:1

• ◪ Maximum flow rate : 1600L/min

• ◪ Maximum air output pressure: 16bar.

• ◪ Applicable medium: clean air

• ◪ Air inlet minimum pressure: 1bar

Suncenter  DGMA03 series Pneumatic Air booster pump with single air control non-equilibrium air distributing valve to realize the reciprocating motion of the pump, are made of aluminum alloy and stainless steel manufacturing, all the seals are imported high quality products and equipment for the pneumatic drive are 10bar, in order to ensure the pump's life, it is recommended driving pressure is less than or equal to 8 bar.

• ◪   Technical parameters

• ◪ Driven source: clean compressed air

• ◪ Air pressure control system

• ◪ Drive compressed air pressure: 1-8bar (recommended drive pressure<8bar)                        

• ◪ Boost Ratio:3:1

• ◪ Maximum flow rate : 420L/min

• ◪ Maximum air output pressure: 24bar.

• ◪ Applicable medium: clean air

• ◪ Air inlet minimum pressure: 1bar

Suncenter  DGVA05 series Pneumatic Air booster pump with single air control non-equilibrium air distributing valve to realize the reciprocating motion of the pump, are made of aluminum alloy and stainless steel manufacturing, all the seals are imported high quality products and equipment for the pneumatic drive are 10bar, in order to ensure the pump's life, it is recommended driving pressure is less than or equal to 8 bar. This series pump's drive piston diameter of 160mm, as a single action pump, all single acting pump head with exhaust cooling.

• ◪  Technical parameters

• ◪ Driven source: clean compressed air

• ◪ Air pressure control system

• ◪ Drive compressed air pressure: 2-8bar (recommended drive pressure<8bar)                        

• ◪ Boost Ratio:5:1

• ◪ Maximum flow rate : 820L/min

• ◪ Maximum air output pressure: 40bar.

• ◪ Applicable medium: clean air

• ◪ Air inlet minimum pressure: 2bar

Characteristics :

It is using pure compressed air as the driving source, pneumatic booster pump for the pressure source, the use of pure air as the pressurized medium, the output air pressure and the pressure of the driving air source pressure. By adjusting the pressure of the driven air source, the corresponding pressure of the air pressure can be obtained. When the air pressure of the air pressure and the pressure of the booster is balanced, the pneumatic booster pump stops the pressurization, and the output air pressure is stable. Therefore it has the characteristics of explosion proof, energy saving, environmental protection, adjustable output pressure, small volume, light weight, simple operation, reliable performance and wide application range.

• ◪ The system including: DGMA02 air booster pump,

• ◪ F.R.L combination (adjust driven air pressure+ filter+ lubricant)

• ◪ Air tank (20L/40L),Driven air switch, high pressure needle valve, high pressure gauge, reducing valve

• ◪ The system including: DGVA02 air booster pump

• ◪ F.R.L combination (adjust driven air pressure+ filter+ lubricant)

• ◪ Air tank (20L/40L),Driven air switch, high pressure needle valve, high pressure gauge, reducing valve

• ◪ The system including: DGVA05 air booster pump

• ◪ F.R.L combination (adjust driven air pressure+ filter+ lubricant)

• ◪ Air tank (20L/40L),Driven air switch, high pressure needle valve, high pressure gauge, reducing valve