energy saving hydro test pump round factory price for metallurgy

latest_products

Instrucciones de la bomba de prueba de presión manual

Bomba de prueba de presión hidráulica / hidráulica / hidrostática

Máquina de prueba de medición externa del cilindro de gas con chaquetas de agua

Bomba de inyección de reactivo químico neumático

Información de producto
realimentación

Suncenter DLS Series hydraulic pressure test pump

SUNCENTER- Hydraulic test benches are compact and delicacy solution tailored to customer specific requirements with air driven liquid pumps as well as all accessories to be fitted and installed on the frame or in closed cabinet.

To operate this system, the pressure gauges, valves and pressure regulators have to be fitted on panels. The outlet pressure is easily to be set through a simple air regulator. The pump stops automatically when this end pressure is reached and restarts with a slight drop in the outlet pressure or an increase in the air drive pressure. SUNCENTER Hydraulic power packs are available with wide range of pressure ratios make these series of pumps ideal for powering a variety of oil/hydraulic operations. The maximum operating pressure up to 640 MPa.

As the pressure will be generated by means of a pneumatically operated pump，the electric connection will not be necessary. To operate this system, the air driven liquid pump have to be equipped with the air control unit combined filter and water separator, pressure-regulating valve, pressure control gauge as well as manual relieve valve. In this operation, the pump will be mounted to the stainless steel tank in the closed cabinet in a compact and space saving manner. Pressure gauges, valves and pressure regulators will be fitted on panel.

The desired operating pressure can be attained by adjusting the driving air pressure. When the driving air pressure and the output pressure reach the balance, the pump stops filling pressure and the output pressure stays at the preset value. This hydraulic unit can be used for all kinds of pressure testing and test tools for research and test institutes or for other functions requiring a determined pressure.

Suncenter round hydro test pump factory price for metallurgy-1

Suncenter round hydro test pump factory price for metallurgy-2

DLS Sereis hydraulic pressure test bench-The hottest selling Model C cabinet

Suncenter round hydro test pump factory price for metallurgy-3

◪ The standard hydraulic test bench including following parts:
◪ Air –driven liquid booster pump
◪ Stainless steel material cabinet (Three models for choosing)
◪ F.R.L combination for driven air (adjusts air pressure, add lubricating oil and filter)
◪ Driven air switch (Pump starting switch), driven air pressure gauge, water tank
◪ Liquid inlet/outlet switch, high pressure liquid guage, unloading valve, interconnecting pipes etc.
◪ And we could also customize it according to clients’ special requirement.

Suncenter round hydro test pump factory price for metallurgy-4

Suncenter round hydro test pump factory price for metallurgy-5

Model	Pressure Ratio	Driven air pressure PL	Formula to calculate outlet pressure	MAX Outlet Pressure(bar)*	Driven air inlet port	High pressure Outlet port	MAX Flow (L/min)**
DLS-DGGD4	4:1	3-8 bar	4XPL	32	G 1/2	NPT/ZG	70.0
DLS-DGG6	6:1	3-8 bar	6XPL	48	G 1/2	NPT/ZG	29.91
DLS-DGG10	10:1	3-8 bar	10XPL	80	G 1/2	NPT/ZG	18.84
DLS-DGG16	16:1	3-8 bar	16XPL	128	G 1/2	NPT/ZG	12.42
DLS-DGG28	28:1	3-8 bar	28XPL	224	G 1/2	NPT/ZG	7.11
DLS-DGG40	40:1	3-8 bar	40XPL	320	G 1/2	NPT/ZG	4.89
DLS-DGG64	64:1	3-8 bar	64XPL	512	G 1/2	NPT/ZG	3.08
DLS-DGG80	80:1	3-8 bar	80XPL	640	G 1/2	NPT/ZG	2.44
DLS-DGG100	100:1	3-8 bar	100XPL	800	G 1/2	NPT/ZG	1.92
DLS-DGG130	130:1	3-8 bar	130XPL	1040	G 1/2	NPT/ZG	1.47
DLS-DGG175	175:1	3-8 bar	175XPL	1400	G 1/2	NPT/ZG	1.14
DLS-DGG255	255:1	3-8 bar	255XPL	2040	G 1/2	NPT/ZG	0.75
DLS-DGG400	400:1	3-8 bar	400XPL	3200	G 1/2	NPT/ZG	0.48
DLS-DGG510	510:1	3-8 bar	510XPL	4080	G 1/2	NPT/ZG	0.65
DLS-DGG800	800:1	3-8 bar	800XPL	6400	G 1/2	NPT/ZG	0.42

video

w******y

Suncenter hydro test pump adopts both manual soldering and mechanical soldering in the production. Combining these two soldering methods greatly contributes to reducing the defective rate. The product provides protection against light, heat, and oxygen

w******n

In order to ensure users' safety, Suncenter pneumatic test pump is strictly tested and has been certified under many international standards including FCC, CCC, CE, and RoHS. It is not likely to tear paint off the base materials

i******j

To guarantee a good electrical contact, Suncenter hydro test pump is carefully treated both in components soldering and oxidation. For example, the metal part of it has been exquisitely handled with paint to avoid oxidation or corrosion. There is no residual glue after stripped off

i******d

In the manufacturing process of Suncenter pneumatic test pump, every production stage is under strict control to prevent issues such as too many sluggish components or parts, high rework rate, and defective percentage. Its rolling end face is very smooth and neat

b******c

Suncenter hydro test pump has passed the anti-static and electro-static discharge tests required in the electronics industry. The product has high sensitivity to ESD, protecting people from the harm of discharged electric. The product, with strong adhesive holding power, can withstand heavyweight

n******z

pneumatic test pump is possessed of such advantages as pneumatic test pump, thus it has a vast application prospect. Its rolling end face is very smooth and neat

Mensaje del producto

*Nombre

Teléfono

*Correo electrónico

*Contenido